-
Multi-modal collaborative strength testing has become a new standard: the same sample completes the integrated testing solution of tension-compression-bending-impact2026-08-28 07:00:00
In 2026, the field of material mechanics testing will usher in an important change: the new version of the strength test standard clearly requires for the first time that strength correlation analysis be carried out on the same sample under four load modes of tension, compression, bending, and impac
-
2026 Tensile testing machine selection and pit avoidance guide: a complete decision-making framework in the four dimensions of force value, accuracy, fixture, and standard2026-08-27 07:00:00
Tensile testing machine (also known as universal testing machine, universal material testing machine) is one of the core testing equipment in material research and development, quality control, and factory inspection.From a film peeling test of a few Newtons to a metal tensile test of hundreds of th
-
Interpretation of GB/T 6396-2026 Composite Steel Plate Mechanical and Process Performance Test Methods: A complete review of the key points of tensile, shear, and bending tests2026-08-26 07:00:00
In August 2026, the State Administration for Market Regulation approved the release of "GB/T 6396-2026 Composite Steel Plate Mechanical and Process Performance Test Methods" to replace the old version of the standard that had been implemented for many years.As the core testing basis for composite st
-
A complete guide to hydrogen sulfide stress corrosion testing: NACE TM0177 standard + equipment selection2026-08-26 07:00:00
In the process of oil and gas extraction and transportation, hydrogen sulfide (H₂S) is one of the most common and destructive corrosive media.Sulfide stress corrosion cracking (SSC) and stress corrosion cracking (SCC) in hydrogen sulfide environments are the main causes of failure of oil well pipes,
