Microcomputer controlled electronic universal testing machine (0-300KN)

Function introduction:

Shandong Huayan's microcomputer-controlled electronic universal testing machine has the characteristics of compact structure, simple and easy to use, and can be used for force measurement tests such as tension, compression, bending, shearing, peeling, and tearing with a maximum load of 300 kN.

The main machine adopts high-precision ball screw loading, which has high rigidity and good linear motion characteristics.Optional load sensors with different ranges can provide accurate measurement data for samples as small as micron-level fibers and as large as fully loaded structural parts.In addition, a wide range of fixtures, deformation measurement and other accessories enable mechanical testing of different materials and samples.

The control method adopts microcomputer control and uses special Test software. This measurement and control software can be used for electronic universal testing machines to conduct various metal and non-metal tests, and complete various functions such as real-time measurement and display, data processing, and result output according to corresponding standards.It can simultaneously display various indicators such as force value, displacement, deformation, speed, etc., and realize real-time screen display of various test curves such as force-deformation, force-displacement, etc. It can be switched to observe at any time, and the curve can be enlarged and reduced. It is very convenient and can display dynamic curves in real time. The test solution covers medical equipment, biomaterials, textiles, elastomers, food, small parts, wires, paper, plastics, films, etc.

Related standards:

GB/T 16491-2008 "Electronic Universal Testing Machine"

GB/T 2611-2007 "General Technical Conditions for Testing Machines"

JJG 475-2008 "Calibration Regulations for Electronic Universal Testing Machines"

Customers can choose equipment with different technical indicators according to their needs.

Technical indicators:

Specification model: WDW

Maximum load (kN): 300

Optional test load (kN): 0.1, 0.2, 0.5, 1, 2, 5, 10, 200, 300

Test space: tension and compression double space

Testing machine level: Level 0.5/Level 1.0

Test force measurement range: 0.4%-100%FS/2%-100%FS

Relative error of test force indication: ±0.5%/±1.0%

Test force resolution: 1/500000FS

Force control rate adjustment range: 0.005-5%FS/s

Relative error of force control rate: within ±1% of the set value

Deformation resolution: 1/500000FS

Deformation measurement range: 0.2%-100%FS

Relative error of deformation indication: within ±0.5% of the set value

Deformation rate adjustment range: 0.02-5%FS/s

Displacement resolution: 0.04μm

Relative error of displacement indication: within ±0.5% of the set value

Cross beam moving speed adjustment range (mm/min): 0.05 ~ 500 (speed can be increased)

Relative error of crossbeam moving speed: set speed ≤ 0.05mm/min, set value within ± 1.0%; set speed > 0.05mm/min, set value within ± 0.5%;

Crossbeam travel (mm): 1000 (can be customized)

Test width (mm): 400-550 (can be customized)

Working voltage: single-phase 220V±10%; 50Hz

Safety protection: force overload protection, mechanical displacement limit, voltage overload protection