Special horizontal tensile testing machine for the power industry

The electro-hydraulic servo horizontal tensile testing machine in the electric power industry adopts the overall steel plate welded frame structure of the frame. The single-rod double-acting piston cylinder applies the test force through the reverse frame composed of the moving beam tie rod and the front puller. The sample is connected through the pin shaft and the load sensor measures the force. The stretching space of the rear puller can be adjusted stepwise according to the length of the sample specification. The rear puller is electricDeceleration adjustment, manual channeling pins are fixed on both sides of the frame, the test force and test curve are displayed on the computer screen, and the test data is automatically processed according to the requirements of the test method. This machine is mainly suitable for tensile testing of flexible parts such as power fittings, wires and cables, double hooks, chain hoists, wire ropes, slings, sling anchors, anchor chains, steel core aluminum stranded wires, and wire tighteners.

Main technical parameters

1. Test force: 2000kN; (can be specially customized according to user requirements)

2. Force measuring range: 0～400kN, 0～1000kN, 0～2000kN 3 levels;

3. Test force accuracy: ±1%;

4. Test space: 500-6000mm (can be specially customized according to user requirements);

5. Piston stroke: 1000mm;

6. Displacement measurement range: 2500mm;

7. Displacement measurement resolution: 0.01mm;

8. No-load fast forward speed of the slider: not less than 200mm/min;

9. Test speed: 0-80mm/min;

10. Working center height: 1000mm;

11. Force measurement method: load sensor force measurement;

12. Control test method: computer automatically controls the test process

13. Approximate overall dimensions of the host (length*width*height): 15000x1200x1400mm;

14. Various test curves can be displayed: force-displacement, force-time, force-deformation, stress-strain, etc.