News

Recently, our company has reached a cooperation with XX University to carry out technical handover activities with its core product - single-arm tensile machine.The event was very popular. Teachers and students actively participated in the experiments and jointly explored the scientific and technolo

As shown in Figure 1, the CLC fixture consists of two pairs of steel blocks, each pair of steel blocks clamped with four bolts.When installed, the ends of the 5.5-inch-long specimen are flush with the ends of the block.The steel block has a clamping surface 1.2 inches wide and is used for testing sp

Standard specimens (shown in front view in Figure 1) are 3 inches long, 0.75 inches wide, and up to 0.50 inches thick.Typically a specimen thickness of approximately 0.1 inch is used.The clamp can also accommodate shorter and narrower specimens if required.Each edge of the specimen is machined with

1. The core mechanism of the KRL test The KRL test (CEC L-45-A-99 standard) evaluates the shear stability of polymer additives in lubricating oil (such as viscosity index improvers VIIs, anti-wear agents) by simulating high shear stress environments (such as gearboxes, hydraulic systems).Its core in